Observations of desert flood bores     

Marwan A. Hassan 《地球表面变化过程与地形》1990,15(5):481-485

Flood bores have been measured in desert stream floods. The bores were steep and small pebbles were observed to be pushed ahead. Bore velocity changed downstream and was controlled by local channel geometry. In narrow reaches, the bore advanced at rates twice those of wide reaches. Mean bore velocity was about 50 per cent of that of mean flow at peak flood discharge. The surfaces of shallow bores were covered by air foams. This was not the case in deeper, faster examples.  相似文献   

Developing a long-term monitoring network under uncertain flowpaths     

Hassan AE 《Ground water》2006,44(5):710-722

A long-term monitoring well network is developed using complementary and simple approaches in conjunction with a stochastic ground water flow and transport model. The development is illustrated for a case study of a U.S. nuclear testing site (Shoal) that is undergoing environmental restoration. The network design builds on three different, yet complementary, tools for locating the monitoring wells with a main objective of detection monitoring. The first tool is applied to select potential siting horizons where monitoring wells could be located. The second tool is used to place monitoring wells in locations with high success probability. The success here is defined as the detection of migrating stochastic plumes before a certain mass percentage reaches a compliance boundary. The third tool is used to analyze detection efficiency of multiple combinations of three wells. Seventy-six different three-well networks are selected from 20 candidate locations and are evaluated for detection efficiency. From the 76 networks analyzed, 28 attain detection efficiency close to or above 70%. The results of the different analyses provide multiple alternatives for the locations of the three wells, which will become part of the long-term monitoring network at Shoal. A number of combinations are equally good, and the final choice will depend on practical considerations and future agreements between model sponsor and regulators.  相似文献   

Validation of numerical ground water models used to guide decision making     

Hassan AE 《Ground water》2004,42(2):277-290

Many sites of ground water contamination rely heavily on complex numerical models of flow and transport to develop closure plans. This complexity has created a need for tools and approaches that can build confidence in model predictions and provide evidence that these predictions are sufficient for decision making. Confidence building is a long-term, iterative process and the author believes that this process should be termed model validation. Model validation is a process, not an end result. That is, the process of model validation cannot ensure acceptable prediction or quality of the model. Rather, it provides an important safeguard against faulty models or inadequately developed and tested models. If model results become the basis for decision making, then the validation process provides evidence that the model is valid for making decisions (not necessarily a true representation of reality). Validation, verification, and confirmation are concepts associated with ground water numerical models that not only do not represent established and generally accepted practices, but there is not even widespread agreement on the meaning of the terms as applied to models. This paper presents a review of model validation studies that pertain to ground water flow and transport modeling. Definitions, literature debates, previously proposed validation strategies, and conferences and symposia that focused on subsurface model validation are reviewed and discussed. The review is general and focuses on site-specific, predictive ground water models used for making decisions regarding remediation activities and site closure. The aim is to provide a reasonable starting point for hydrogeologists facing model validation for ground water systems, thus saving a significant amount of time, effort, and cost. This review is also aimed at reviving the issue of model validation in the hydrogeologic community and stimulating the thinking of researchers and practitioners to develop practical and efficient tools for evaluating and refining ground water predictive models.  相似文献   

Evidence for Holocene environmental change from C/N ratios, and δ13C and δ15N values in Swan Lake sediments, western Sand Hills, Nebraska     

Kamaleldin M. Hassan  James B. Swinehart  Roy F. Spalding 《Journal of Paleolimnology》1997,18(2):121-130

Profiles of percent carbon and nitrogen, carbon/nitrogen (C/N) ratios and stable carbon (¹³C), and nitrogen (¹⁵N) isotopic ratios in organic matter from an 11.6 m core were used to reconstruct environments of deposition in the Swan Lake basin during the past 5300 YBP. The upper 6.5 m consisted of gyttja containing variable amounts of reddish brown-colored fine organic matter and calcium carbonate. It was followed by a 0.5 m sandy silt, which was followed by a 3.6 m reduced layer characterized by large quantities of black organic plant remains, sapropel, and then by another sapropel layer consisting mainly of well-sorted sapropelic sand with relatively low organic matter content. The C- and N-contents in the organic matter in the sediment profile ranged from 0.5 to 23% and from 0.02 to 2%, respectively. Carbon content were positively correlated to both N and clay content while carbon content was negatively correlated to sand content. Two major environmental phases in Swan Lake were apparent from large differences in the C and N data of the sediment organic matter. These include the sapropel (marsh) stage that stretched from approximately 5330 to 3930 YBP, and the following gyttja (open water stage). During the sapropel marsh plants identified in a previous pollen study as cattails and sedges proliferated and produced copious amounts of well-preserved organic matter. C/N ratios, ¹³C values, and ¹⁵N values in the sapropel were significantly different from those that characterized organic matter in the gyttja. During the gyttja ¹³C values indicated that deep primary producers have dominated lake biomass. By utilizing bicarbonate as their C-source, the accumulating biomass became relatively enriched ¹³C values. The presence of high sediment CaCO₃ contents indicated more alkaline and deeper water conditions prevailed during the gyttja. Further refinement of the data suggested that each major phase initially contained an identifiable transition stage. During the sapropelic (initial marsh stage) which occurred before 5330 YBP, sand content gradually decreased as organic matter increased. As reflected by high C/N ratios and slightly enriched ¹³C values, these sands appear to have contained sufficient permeability to promote partial mineralization of accumulated organic-N containing compounds. A short initial gyttja transition period from about 3930–3830 YBP occurred in which the sediment silt content was anomalously high relative that measured in the surrounding layers. The silt content suggests that this turbid transition layer can not be completely explained by sediment mixing via bioturbation. The silts appeared to have been associated with the sharp climate change that resulted in higher water-table conditions during the gyttja stage.  相似文献   

Origin of peraluminous granites and granodiorites, Iberian massif, Spain: an experimental test of granite petrogenesis   总被引：27，自引：0，他引：27  

Antonio Castro  Alberto E. Patiño Douce  L. Guillermo Corretgé  Jesús D. de la Rosa  Mohammed El-Biad  Hassan El-Hmidi 《Contributions to Mineralogy and Petrology》1999,135(2-3):255-276

The discrimination between potential source materials involved in the genesis of Iberian granites and granodiorites, as well as the role of mantle-crust interactions, are examined using constraints imposed by melting experiments, melting-assimilation experiments and Sr-Nd isotope systematics. The Sr-Nd isotope relationships indicate the existence of different genetic trends in which juvenile mantle materials are involved by different mechanisms: (1) a source trend, traced by a particular evolution of the pre-Hercynian basement and indicating mantle participation at the time of sedimentation; (2) a set of magmatic trends traced by gabbro-tonalite-enclave-granodiorite associations, implying the incorporation of new mantle material at the time of granite generation. These relationships strongly support a pure crustal origin for the peraluminous leucogranites, derived from partial melting of crustal protoliths, and a hybrid origin for the peraluminous granodiorites. These granodiorites are the most abundant granitic rocks of the Central Iberian zone (CIZ) of the Iberian massif, implying that processes of hybridisation by assimilation and/or magma mixing played an important role in granitoid production during the Hercynian orogeny. These hypotheses have been tested by means of melting and assimilation experiments. Melting experiments in the range 800–900 °C and at pressures of 3, 6, 10 and 15 kbar indicate that: (1) several potential source materials such as Bt-Ms gneisses and metagreywackes are suitable for the production of peraluminous leucogranite melts; (2) the melt compositions are always leucogranitic, regardless of pressure; (3) pressure exerts a strong influence on the fertility of the source: experiments at 3 kbar produce more than 20 vol% of melt, compared with less than 5 vol% of melt produced at 10 and 15 kbar and at the same temperature. The melting-assimilation experiments carried out at 1000 °C and 4, 7 and 10 kbar and using a proportion of 50% gabbro and 50% gneiss give high melt proportions (more than 50 vol.%) and noritic residues. These melts have the composition of leucogranodiorites, and overlap with part of the compositional range of peraluminous granodiorites of the Iberian massif. The generation of more mafic granodiorites may be explained by the incorporation of some residual orthopyroxene to the granodiorite magmas. The low solubility of Fe + Mg prevents the generation of granodiorite melts with more than 3 wt% of MgO + FeO at all crustal pressures. The large volumes of peraluminous, hybrid granodiorites, produced by assimilation of crustal rocks by mantle magmas, imply that an important episode of crustal growth took place during the Late-Palaeozoic Hercynian orogeny in the Iberian massif. Received: 30 June 1998 / Accepted: 27 November 1998  相似文献   

Environmental impact assessment on water quality deterioration caused by the decreased Ganges outflow and saline water intrusion in south-western Bangladesh   总被引：3，自引：0，他引：3  

Md. Mokhlesur Rahman  Muhammad Qumrul Hassan  Mohammad Saiful Islam  S. Z. K. M. Shamsad 《Environmental Geology》2000,40(1-2):31-40

 This paper deals with an environmental impact assessment of low water flow in the river Ganges during a dry period at the Khulna and Mongla port areas in south-western Bangladesh. Large-scale surface water withdrawal in India after commissioning the Farakka Barrage causes a drastic fall in the Ganges low-flow condition within the Bangladesh territory during every dry period. The average lowest discharge in the Ganges is 552 m³/s, which is about 73% less than that in the pre-Farakka time. This has caused the deterioration of both surface and groundwater quality of the study area. Salinity is the principal cause of water quality degradation in the area. Present observation shows that the surface water of the area is sulphate-chloride dominated, which signifies high salinity whereas the groundwater is categorized as of medium to high salinity. To maintain the Rupsa River's maximum salinity below 1000 μS/cm the discharge in the Ganges should be ∼1500 m³/s, whereas that at Garai basin is ∼10 m³/s. If this present situation continues it will be a crippling blow to the environment of the area in the long term. An integrated multidisciplinary approach to hydrogeological research is urgently required to salvage the area from further deterioration. Received: 9 August 1999 · Accepted: 8 March 2000  相似文献   

Rock composition and origin of the Duwi Formation calcareous rocks, Upper Egypt     

Baioumy H. M. Attia A. M. Boulis S. N. Hassan M. S. Helmy M. E. 《中国地球化学学报》2005,24(4):316-326

Upper Cretaceous phosphorite beds of the Duwi Formation, Upper Egypt, are intercalated with limestone, sandy limestone, marl, calcareous shales, and calcareous sandstone. Calcareous intercalations were subjected to field and detailed petrographic, mineralogical and geochemical investigations in order to constrain their rock composition and origin. Mineralogically, dolomite, calcite, quartz, francolite and feldspars are the non-clay minerals. Smectite, kaolinite and illite represent the clay minerals. Major and trace elements can be classified as the detrital and carbonate fractions based on their sources. The detrital fraction includes the elements that are derived from detrital sources, mainly clay minerals and quartz, such as Si, Al, Fe, Ti, K, Ba, V, Ni, Co, Cr, Zn, Cu, Zr, and Mo. The carbonate fraction includes the elements that are derived from carbonates, maily calcite and dolomite, such as Ca, Mg and Sr. Dolomite occurs as being dense, uniform, mosaic, very fine-to-fine, non-ferroan, and non-stoichiometrical, suggesting its early diagenetic formation in a near-shore oxidizing shallow marine environment. The close association and positive correlation between dolomite and smectite indicates the role of clay minerals in the formation of dolomite as a source of Mg^2＋ -rich solutions. Calcareous rocks were deposited in marine, oxidizing and weakly alkaline conditions, marking a semi-arid climatic period. The calcareous/argillaceous alternations are due to oscillations in clay/carbonate ratio.  相似文献   

Risk Assessment and Prediction of Flyrock Distance by Combined Multiple Regression Analysis and Monte Carlo Simulation of Quarry Blasting     

Danial Jahed Armaghani  Amir Mahdiyar  Mahdi Hasanipanah  Roohollah Shirani Faradonbeh  Manoj Khandelwal  Hassan Bakhshandeh Amnieh 《Rock Mechanics and Rock Engineering》2016,49(9):3631-3641

  相似文献   

Selection of a Landfill Site for Solid Waste Management: An Application of AHP and Spatial Analyst Tool   总被引：2，自引：0，他引：2  

Sunil Kumar  Mohammad Izhar Hassan 《Journal of the Indian Society of Remote Sensing》2013,41(1):45-56

Selection of a suitable landfill site for Solid Waste Management (SWM) forms an important component of urban planning. The problem of SWM has assumed significant proportion for the municipal authorities in the wake of rapid industrialization, urbanization and resultant pressure on existing resources. Many criteria such as distance from residential locations, transport connectivity, presence of water-bodies (drains, ponds, rivers etc.) and forests, ground water table and geology are taken into consideration while planning for suitable sites. Spatial Analyst Tool along with Analytic Hierarchy Process (AHP) model is extremely useful in such multicriteria decision making process. The present study, based on these tools/techniques, endeavours to identify a suitable location for landfill site in a part of the National Capital Territory of Delhi. The study identifies six potential sites out of which one has been proposed and recommended as the best suitable site.  相似文献   

Evaluation of Bioavailability and Partitioning of Aluminum in Sediment Samples of Different Ecosystems by Modified Sequential Extraction Methods     

Sumaira Khan  Tasneem G. Kazi  Muhammad B. Arain  Nida F. Kolachi  Jameel A. Baig  Hassan I. Afridi  Abdul Q. Shah 《洁净——土壤、空气、水》2013,41(8):808-815

Sequential extraction procedures are widely used to characterize the different operational fractions with different potential toxicity of metals in environmental solid samples. The present work describes the application of different analytical approaches for sequential extraction of aluminum to evaluate its mobility, availability, and persistent chemical forms in sediment samples of different fresh water ecosystems (lake, canal, and river). The conventional BCR three‐stage sequential extraction procedure (C‐BCR) was modified at each stage, by applying ultrasonic device (U‐BCR), in order to shorten the required shaking time of 16 h for each three steps (excluding the hydrogen peroxide digestion in step 3, which was not performed with ultrasonic bath), could be completed in 40, 50, and 45 min, respectively. The aluminum in all extracts were determination by atomic absorption spectrometry using nitrous oxide – acetylene flame. The accuracy of results obtained from C‐BCR and proposed U‐BCR was verified with literature reported values of certified sediment sample (BCR 701). The overall recoveries of aluminum obtained by proposed U‐BCR were found in the range of 96.7–113% of those values obtained with C‐BCR for all fractions. Use of ultrasonic device, provided a large saving in extraction time relative to conventional shaking. It was observed that major part of Al in real sediment samples (80–83% of total Al) were bound to residual fraction. The acid soluble fraction of aluminum extracted by 0.11 mol/L CH₃COOH has good correlation with aluminum content in corresponding water samples of each ecosystem.  相似文献